Next Generation Intelligent Adiabatic Evaporative Pre-Cooling System

An adiabatic evaporative pre-cooling process and condenser protection are combined with mechanical air 

filtration in the Intelligent Adiabatic Cooling System. The Intelligent Adiabatic Cooling System is installed 

outside in front of the cooling equipment's condensers. The Intelligent Adiabatic Cooling System starts the 

adiabatic process before the mechanical cooling kicks in, and the equipment gets a temperature-reducing fine

 mist of processed water, which lowers the temperature of condensation within the cooling circuit.

During the process, the temperature of the incoming air into the adiabatic cooling system decreases significantly,

 generally in the range of 10°C to 20°C, increasing chiller efficiency by up to 37%.

Condensers must be protected from corrosion, mineral deposits (limescale), and other potentially dangerous 

materials. Adiabatic Cooling employs a proprietary protective membrane (pre-filter) that protects condensers 

from calcium and mineral deposits, corrosion, dust, and ultraviolet radiation. The membrane keeps water mist 

from directly contacting the condenser. Water mist, direct sunshine, and grime are all captured by the self-cleaning

 membrane. The particular cell material of the membrane adds no additional resistance to airflow entering the 

condenser.

EnerGeo's intelligent adiabatic pre-cooling system concept is based on adiabatic evaporative cooling, which is the

 delicate process of spraying treated water using a fine water mist to cool intake air flowing into the condensers in 

advance without damaging or causing efficiency loss on the condensers.

Water purification is also important, thus EnerGeo™ has a four-step water treatment module to protect condensers

 against dust, calcium, and mineral deposits (limescale), algae, and bacteria (including Legionella).

The pressure in the adiabatic cooling system runs from 70 to 140 bar and enables extremely efficient water 

spraying and evaporation, resulting in a large temperature drop from dry to wet bulb.

The new generation iNTELLIGENT ADIABATIC COOLING SYSTEM and its specialized software offer 

intelligence to the adiabatic cooling system, guaranteeing that the adiabatic system operates optimally while 

consuming the least amount of water. The controller examines the air temperature, humidity, chiller load, and 

daily cycle. The iACS automatically changes working modes based on these accurately determined parameters,

 resulting in 100% water evaporation and maximum efficiency.

During the adiabatic process, the temperature of the incoming air flowing into the adiabatic cooling system drops 

significantly to values between 10 and 20°C.

The lower air temperature produced by the adiabatic cooling method significantly boosts the cooling unit's 

cooling capability. By enabling the unit to function at a substantially lower temperature from the start, less power 

is required, resulting in enormous benefits in efficiency and cost-cutting.

Our technology is modular and may be used with any type of dry cooler or chiller. All system components are

 built in such a way that the adiabatic cooling system may be installed fast, easily, and with the highest 

dependability and lifetime available on the market.

Note:

The iNTELLIGENT ADIABATIC COOLING SYSTEM has no negative impact on the operation of the air 

conditioning or cooling systems, as intended by the manufacturer.

The iNTELLIGENT ADIABATIC COOLING SYSTEM For CHILLERS decreases the air temperature flowing 

into the unit, allowing the air-cooling unit to operate in standard modes rather than the higher settings required 

for operations in extreme heat.

Features of the iNTELLIGENT ADIABATIC COOLING SYSTEM:

The membrane (pre-filter) keeps calcium and mineral (limescale) deposits away from the condenser. The 

membrane keeps water mist from making direct contact with the condenser. Water mist, direct sunshine, and 

are all captured by the self-cleaning membrane. The particular cell material of the membrane adds no additional 

resistance to airflow entering the condenser.

The nozzle panel sprays a mist wall in front of the condenser using tiny nozzles. Water evaporates immediately 

as it comes into touch with heated air. This results in significant water usage reductions.

Water is treated with specially created biochemicals before entering the intelligent adiabatic evaporative 

pre-cooling system, altering the structure of calcium carbonate molecules and preventing them from clinging to 

surfaces and accumulating as damaging limescale. The biological ingredient and techniques are completely harmless to the environment.

The Adiabatic Cooling System includes ultraviolet sterilizers that kill all bacteria in the water that passes through 

the system, including Legionella.

It is critical for your cooling system to protect the condensers from deposits, dirt, and direct sunlight. Adiabatic 

Cooling System protecting membranes effectively protects your condensers. The cleaner your cooling 

equipment's condenser, the better the heat exchange and removal procedures. Adiabatic Cooling System 

protecting membranes enables improved longevity and efficiency, while adiabatic panels ensure air pre-cooling

 and avoid overheating of your equipment.

The iNTELLIGENT ADIABATIC COOLING SYSTEM is compatible with all air conditioning and cooling 

systems of any size. The iNTELLIGENT ADIABATIC COOLING SYSTEM is installed in a single day due to

 its innovative modular design.

If your cooling towers are experiencing or are expected to undergo cooling capacity reduction, adiabatic cooling 

is the answer you can obtain right now! 

Maintenance is simple and inexpensive. You just need to replenish the BIO Tablets once a month. A five-minute

 technique that may be completed by your maintenance crew or any skilled staff member.

The iNTELLIGENT ADIABATIC COOLING SYSTEM Device has a monitoring system that checks electrical 

usage, allowing you to see the reductions in electrical consumption after installation.

OUR MORE PRODUCTS:

Electrochemical Treatment System | Scale & Bio Remover  |  Electrolytic Scale Remover  | 

 Non Chemical Water Treatment for Cooling Tower  | Automatic Tube Cleaning System  | 

 Automatic Condenser Cleaning System |  Adiabatic Cooling System For Chillers